Classic ConstructionImperial ConstructionExpress ConstructionColonial Construction
Classic Construction
Classic Series Cabinet Construction
1. 3/4″ Hardwood face frames with glued and pocket screwed joints. 2. 1/2″ Particle board back with Maple print interior, elimination the need for hang rails. 3. 1/2″ Particle board sides, tops and bottoms, with Maple print interior and exterior. 4. 3/4″ Particle board shelving with maple print on both sides and one edge. All shelves are adjustable, with base cabinets having 1/2 depth shelves, supported by shelf clips. 5. 3/4″ Hardwood stile and rail doors, mortise and tenon. 6. Blum one-piece adjustable concealed hinge with lifetime warranty.
Door Upgrade Options:
1. Blumotion soft close hinge.
7. Available options: Applied 1/4″ veneered skins.
8. Standard finish consists of stain, a coat of self-sealing conversion varnish and a top coat of conversion varnish. Finish thickness is approximately 7 mil., wet.
9. 3/4″ Hardwood drawer fronts. PG Maple drawer fronts will be High Density Furniture board.
10. 1/2″ Rabbited plywood drawer with 1/4″ MDF floor, faced with maple print.
Drawer Upgrade Options:
1. 5/8″ Solid hardwood dovetail drawer with soft close 3/4 extension sidemount guides. (DT-GSM)
2. 5/8″ Solid hardwood dovetail drawer with soft close 7/8 extension undermount guides. (DT-BSC 7/8)
3. 5/8″ Solid hardwood dovetail drawer with Blumotion full extension undermount soft close drawer guides. (DT-UMFE)
11. Self adjusting epoxy coated side mount drawer guides. Track weight rating of 75 pounds.
12. Countertop corner stretchers are made of engineered wood.
Classic Series is C.A.R.B. PHASE II Compliant, KCMA Certified, Meets KCMA ESP Standards
During installation if silicone is going to be used, we recommend it be a “Neutral Cure” silicone. Silicone products that contain acetic acid should not be used as it can have a discoloring effect on the finish. Classic Series Cabinet Construction
Imperial Construction
Imperial Series Cabinet Construction
1. 3/4″ Hardwood face frames with glued and pocket screwed joints. 2. 1/2″ Plywood board back with Maple print interior, elimination the need for hang rails. 3. 1/2″ Plywood sides, tops and bottoms, with Maple print interior and exterior. 4. 3/4″ Plywood shelving with maple print on both sides and one edge. All shelves are adjustable, with base cabinets having 1/2 depth shelves, supported by shelf clips. 5. 3/4″ Hardwood stile and rail doors, mortise and tenon. 6. Blum one-piece adjustable concealed hinge with lifetime warranty.
Door Upgrade Options:
1. Blumotion soft close hinge.
7. Available options: Applied 1/4″ veneered skins.
8. Standard finish consists of stain, a coat of self-sealing conversion varnish and a top coat of conversion varnish. Finish thickness is approximately 7 mil., wet.
9. 3/4″ Hardwood drawer fronts. PG Maple drawer fronts will be High Density Furniture board.
10. 1/2″ Rabbited plywood drawer with 1/4″ MDF floor, faced with maple print.
Drawer Upgrade Options:
1. 5/8″ Solid hardwood dovetail drawer with soft close 3/4 extension sidemount guides. (DT-GSM)
2. 5/8″ Solid hardwood dovetail drawer with soft close 7/8 extension undermount guides. (DT-BSC 7/8)
3. 5/8″ Solid hardwood dovetail drawer with Blumotion full extension undermount soft close drawer guides. (DT-UMFE)
11. Self adjusting epoxy coated side mount drawer guides. Track weight rating of 75 pounds.
12. Countertop corner stretchers are made of engineered wood.
Classic Series is C.A.R.B. PHASE II Compliant, KCMA Certified, Meets KCMA ESP Standards
During installation if silicone is going to be used, we recommend it be a “Neutral Cure” silicone. Silicone products that contain acetic acid should not be used as it can have a discoloring effect on the finish. Imperial Series Cabinet Construction
Express Construction
Express Series Cabinet Construction
1. Doors will be ¼” Veneered Flat panel doors or 9/16″ veneered raised panel doors with hardwood stiles and rails.
2. 3/4″ Hardwood drawer fronts. Painted Birch drawer fronts will be High Density Furniture board.
3. 3/4″ Face frames with glued and pocket screwed joints.
4. 1/2″ Particle board back with Maple print interior, eliminating the need for hang rails.
5. 1/2″ Particle board sides, tops and bottoms, with Maple print interior and exterior.
6. 1/2″ Rabbeted plywood drawer with 1/4″ plywood floor, faced with maple print.
Drawer Upgrade Options:
1. Dovetail drawer with side mount 3/4 extension drawer guide.
2. Dovetail drawer guide with soft close under mount 7/8 extension drawer guide.
7. Self-adjusting epoxy coated side mount drawer guides. Track weight rating of 75 lbs.
8. 3/4″ Particle board shelving with Maple print on both sides and one edge.
All shelves are adjustable with base cabinets having ½ depth shelves, supported by shelf pegs.
9. Blum one piece adjustable concealed hinges with lifetime warranty.
Door Upgrade Options:
1. Blumotion soft close hinge.
10. Standard finish consists of hand wiped stain, a coat of self-sealing conversion varnish and a top coat of conversion
varnish. Finish thickness approximately 7 MIL, wet.
11. Unexposed ends will be maple print.
Two options for exposed ends:
*1. Printed, matching wood grained ends, that are closely matching in color to the face frame and doors
*2. Upgrade to: 1/4″ veneered skin is available.
*If option one (printed ends) is ordered the entire kitchen will be printed ends.
Express series is C.A.R.B Phase II Compliant. Meets KCMA ESP Standards
